ML1

But it's also nimble enough to produce amazing sound when used with lower power amplifiers like the MC275, MC1502, MC830, and MC312. To achieve an even higher level of sonic performance, the ML1 can be bi-amped with our MC451 amplifier.

DEEP BASS RESPONSE TO FEEL THE MUSIC

With its 12" woofer, the ML1 has an incredible bass response down to 27Hz, which is close to the lowest frequency the human ear can detect. A subwoofer will typically not be needed to achieve deep, punchy bass.

You might see some similarly sized speakers with more woofers, but don't be deceived by a higher woofer count as there is no substitute for woofer size. In fact, the single 12" woofer in the ML1 has the same surface area as four 6" woofers – and when it comes to the bass frequencies that a woofer produces, the larger the surface area the better to push all that air.

The 12" woofer has been designed to work in an acoustic suspension design enclosure, just like the original. However, much has been learned since the original ML1 speaker, and modern design and simulation tools were used to develop design parameters that provide a bass response similar to the original but without the need for an external equalizer.

The woofer also uses our patented Low Distortion High Performance (LD/HP^®) Magnetic Circuit Design that significantly reduces distortion while increasing power handling and efficiency. The performance improvements from LD/HP are so vast that the 12" woofer in the ML1 could rival woofers twice its size.

EXPANSIVE SOUND COVERAGE FOR ALL LISTENERS

Unlike many speakers that project their best sound over a narrow area in front of the speaker, the ML1 delivers exceptional sound over a wider area at all frequencies thanks to its 4-way design, carefully selected driver complement and sizes, and its expertly engineered crossover network. This means that everyone in the room can enjoy the full stereo sound stage projected by the ML1, instead of being confined to a limited "sweet spot" for listening.

BETTER CROSSOVER FOR BETTER PERFORMANCE

The ML1 uses a custom-built crossover network designed by our engineers for performance and durability. Over-specified components ensure high power handling, while solid state, self-resetting protection devices prevent damage to any of the drivers. The crossover design separates the high and low frequency circuits, and each are available for both bi-wiring or bi-amping as desired.

All the power sent to the ML1 from your amplifiers is fed through our Solid Cinch^™ speaker binding posts that easily but securely attach the speaker cables to prevent them from coming loose and possibly causing a short. The binding posts are gold-plated to prevent corrosion and ensure a quality signal is sent through your speaker cables.

FINISHING TOUCHES

The ML1 is made in the USA and comes with a matching stand that features a vintage die cast aluminum name badge on the base that matches the badges found on some of our amplifiers and integrated amplifiers. The stand has been designed to elevate and position the ML1 loudspeaker for optimum imaging and listening enjoyment. It comes with feet for use on hard floors, and spikes for use on carpet. The speaker can also be set directly on the floor if desired, or placed on a sturdy piece of furniture that's free of decorations or items that could vibrate.

ELECTRONIC SPECIFICATIONS

• Impedance Nominal

  8 Ohms

• Power Rating

  75 – 600 Watts

• Frequency Response

  27Hz – 45kHz

• Sound Pressure Level, 2.8V/1m

  85dB

• Crossover

  180Hz, 500Hz, 4.5kHz

DRIVER SPECIFICATIONS

• Number of Woofers

  1

• Woofer Size

  12"

• Woofer Type

  Polypropylene cone and dust cap with synthetic rubber suspension

• Number of Midranges

  Low Frequency: 2
  Upper Frequency: 1

• Midrange Size

  Low Frequency: 4"
  Upper Frequency: 2"

• Midrange Type

  Low Frequency: Polypropylene cones and dust caps with synthetic rubber suspension
  Upper Frequency: Soft Dome

• Number of Tweeters

  1

• Tweeter Size

  3/4"

• Tweeter Type

  Titanium Dome

GENERAL SPECIFICATIONS

• System Type

  Sealed 4-Way

• Grille

  Black knit cloth, magnetically attached

• Available Finishes

  American Walnut solid woods and veneers with a satin finish

WEIGHTS & DIMENSIONS

• Unit Dimensions (W x H x D)

  15" (38.1cm) x 42-1/8" (107cm) x 13-3/8" (34cm)

• Unit Weight

  62 lbs (28.1 kg)

• Shipping Weight

  71 lbs (32.2 kg)